M3H324923 National University Process Operation and Maintenance Paper 4 questions about Process Operations & MaintenanceCheck the file below for all the qu

M3H324923 National University Process Operation and Maintenance Paper 4 questions about Process Operations & MaintenanceCheck the file below for all the questions It will be checked for Plagiarism. F/QAP/021/001
College of Engineering
Course Work 2
Name of the programme BEng (GCU) Process Operations & Maintenance
Name of Module with Code Materials and Joining Technology – M3H324923
Level/Semester & AY 3 / Sem B & AY2019-20
Name of the Module Dr.Pradeep Kumar Krishnan / Dr.M.Achuthan
Leader/Tutor
Coursework Type Assignment
Assessment weightage 50%
Type and date of submission Online submission – 31th May 2020
Aim To enlightens students about corrosion and its controlling
methods, materials joining methods, pipeline fitting and
non-destructive tests.
Learning Outcomes The learning outcomes of this coursework are:
 Describe the concept of corrosion with metals and
differentiate the principles of various methods of
controlling corrosion. (AM1, AM2)
 Analyse pipe fitting techniques and pipe testing
methods. (AM1, AM2)
 Apply knowledge and skills into various welding
techniques, electrode classification and process
specifications. (AM1, AM4)
 Analyse various codes and standards followed in
welding and pipe fitting processes. (AM2, AM4)
Task(s)
This coursework- CW2 consists of one task (Task 3), An open-ended assignments will be given
to students. Based on corrosion and its control, standard pipe fitting and inspection process,
material joining and nondestructive testing. students should perform the following activities:






QEAD
Possible type of corrosion on the selected materials and its controlling methods.
Possible method of materials joining on the selected material/product.
Possible methods of non-destructive tests on the selected material/product
Students may consider sustainable development besides the given parameters
wherever necessary;
Make sketches or drawings wherever necessary;
Make a report of the given assignments and upload through NU-CoE Learn onlinelink that will be provide;
Rev:03 ver 01
9th July 2017
Template A
1
F/QAP/021/001
Marking scheme
Component
Description
Weightage (%)
1 Type of corrosion on the selected
materials and its controlling methods
25
2 various codes and standards followed
in pipe fitting processes
25
3 Analyze pipe inspection/testing
methods and procedure
20
4 Principle of suitable material joining
and non-destructive tests on the
selected material/product
20
5 Report writing, organizing and
Harvard- CCE referencing
10
Total
100
Instructions
1. Plagiarism is a serious offence. In case of any plagiarism detected, penalty will be
imposed leading to zero mark. Policy and guidelines for dealing with plagiarism and
malpractice in examination can be viewed by clicking:
http://coeportal.nu.edu.om/member/contentdetails.aspx?id=490
2. Course work and reports should be made by the individual student.
3. Students should access all online teaching materials which are uploaded on the
blackboard in order to perform the course work as per the teaching schedule.
4. Course work report should be typed using MS Office or hand written and scanned.
5. The completed course work report is to be submitted online in NU-CoE Learn on or before
the deadline.
6. Course work should be submitted on time. College guidelines on late submission of
coursework can be viewed by clicking:
http://coeportal.nu.edu.om/member/contentdetails.aspx?id=565
Referencing
1. Harvard Referencing (CCE Style) First Edition 2013 should be followed for both in-text and
listing references. This downloadable document can be found in our NU-CoE Learn portal at:
http://coeportal.nu.edu.om/member/contentdetails.aspx?cid=693
Name and Signature of Module leader
Date: 15th May 2020
Dr.Pradeep kumar Krishnan
QEAD
Rev:03 ver 01
9th July 2017
Template A
2
F/QAP/021/001
Task 3
Q1.a) What are the different types of corrosion with the metals and its control
methods? (List at least 5 types of corrosion and its preventions).
[10]
Q1.b) Choose any one corrosion affected object by searching in book/ web/
research article etc. complete the following
[5]
(i) Type of corrosion with image.
[5]
(ii) What are the main causes of the selected type of corrosion?
(iii) What are the various methods of controlling the selected type of
[5]
corrosion?
Q2.a) What are the various pipe fitting techniques applicable to industrial use? (List
[10]
at least 5 types of pipe fitting techniques and its application).
Q2.b) Choose any one pipe fitting object by searching in book/ web/ research article
etc. (suitable for any of the piping system shown in Table 1) complete the following
[5]
(i) Type of selected pipe fitting with image.
(ii) Identify appropriate ASME/ANSI “Standard” and “Codes” for the selected
type of fitting.
[5]
(iii) What are the major benefits of the selected type of fittings?
[5]
Table 1
Piping system
1
Process Piping
2
Pipeline Transportation Systems for Liquid Hydrocarbons
3
Refrigeration Piping and Heat Transfer Components
4
Gas Transmission and Distribution Piping Systems
5
Building Services Piping
6
Slurry Transportation Piping Systems
Q3.a) What are the most popular pipe inspection techniques used in the process
[5]
industries (List at least 5 methods).
QEAD
Rev:03 ver 01
9th July 2017
Template A
3
F/QAP/021/001
Q3.b) Choose any one pipeline image for nondestructive testing (NDT) by
searching in book/ web/ research article etc. complete the following
(i) Type of selected nondestructive testing/inspection with image.
[5]
(ii) Write the testing procedure of selected NDT method.
[5]
(iii) Major advantages and limitation of selected inspection method.
[5]
Q4.a) What are the different welding Methods and where are they best used? (List
at least 5 types of welding and its application).
[5]
Q4.b) Choose anyone welding method most commonly used in modern process
industries by searching in book/ web/ research article etc. complete the following
[5]
(i) Type of selected welding method with image.
QEAD
(ii) Write the welding procedure according to ISO/ASME standard.
[5]
(iii) Major advantages and limitation of selected welding method.
[5]
Rev:03 ver 01
9th July 2017
Template A
4

Purchase answer to see full
attachment