COMP 20006 Middle East College VB.Net Application on Hotel Management System VB.Net application Choose any one from the given list below and create your o

COMP 20006 Middle East College VB.Net Application on Hotel Management System VB.Net application

Choose any one from the given list below and create your own VB.Net Application. When you create your application, make sure to change the company name into your own company name as well as the logo. You have to design your VB forms appropriately and use different controls (like textbox, listbox, combo box, radio buttons, menustrip, progressbar, timer etc) in your application. Your application should include the ALL requirements stated below.

Choose any ONE from the following list of Information system:

 Hotel Management System

Requirements

A brief introduction of what information system selected from above is all about and the scope of information system selected from above.
Create and Design a VB.Net application that will include the following:
Log in form– Create at least 2 different users with different level of access/privileges. Thelogin form should validate the given username and password and will display appropriate messages if invalid data is entered. If valid username and password are entered, a splash screen will be displayed and then the main form/menu will be displayed with all the functionalities/operations that can be performed by the user. A user can have only at most three (3) attempts to login. After three invalid attempts, the application/program should be closed automatically. Password should not be readable. A button “Clear” is be used to clear all the fields so that the next user logon to the system.
Splash screen – will show the name of your system as well as the logo. Create and design your own company name and logo. This will be displayed only if the entered username and password are valid.
Main Menu – a form that will contain all the functionalities a valid user can perform based on his/her level of access/privileges. (e.g. maintenance, transaction, simple, parameter and export report)

3) Write a reflective writing section that summarizes the task, of your work, learning and experience.
check the file below for more instructions and requirementsI attached my work below Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
IN SEMESTER (INDIVIDUAL) ASSIGNMENT
Module Code: COMP 20006
Module Name: Front End Applications Development
Level: 2
Max. Marks: 100
Instructions to Student

Answer all questions.

Deadline of submission: 02/06/2020 23:59

The marks received on the assignment will be scaled down to the actual weightage
of the assignment which is 50% marks

Feedback after final evaluation will be provided by 18/06/2020
Module Learning Outcomes
The following LOs are achieved by the student by completing the assignment successfully
1) Understand and be familiar with visual programming environment and controls
2) Write event-driven programs with the support of an integrated development
environment
Assignment Objective
This is an individual assignment aimed to give students the experience to use visual programming
language, create simple graphical user interfaces (GUI) with common controls and event-driven programs.
Assignment Tasks
1) Submit a work proposal for this assignment or before 12/05/2020 (23:59) which must include:

Timeline for completion of the given tasks.

General overview of proposed plan – initial understanding of all tasks

Identification of Literature Resources
The work proposal must be submitted in a word file through the link available in Moodle.
(10 Marks)
MEC_AMO_TEM_034_01
Page 1 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
2) VB.Net application
(80 Marks)
Choose any one from the given list below and create your own VB.Net Application. When you create
your application, make sure to change the company name into your own company name as well as
the logo. You have to design your VB forms appropriately and use different controls (like textbox,
listbox, combo box, radio buttons, menustrip, progressbar, timer etc) in your application. Your
application should include the ALL requirements stated below.
Choose any ONE from the following list of Information system:
 Gym Management System
 Hotel Management System
 Salon Management System
 Clinic Management System
 Indoor playground Management System
Requirements
A. A brief introduction of what information system selected from above is all about and the scope of
information system selected from above.
:20 marks
B. Create and Design a VB.Net application that will include the following:
1. Log in form– Create at least 2 different users with different level of access/privileges. The
login form should validate the given username and password and will display appropriate
messages if invalid data is entered. If valid username and password are entered, a splash
screen will be displayed and then the main form/menu will be displayed with all the
functionalities/operations that can be performed by the user. A user can have only at most
three (3) attempts to login. After three invalid attempts, the application/program should be
closed automatically. Password should not be readable. A button “Clear” is be used to clear
all the fields so that the next user logon to the system.
:30 marks
2. Splash screen – will show the name of your system as well as the logo. Create and design your
own company name and logo. This will be displayed only if the entered username and
password are valid.
:20 marks
3. Main Menu – a form that will contain all the functionalities a valid user can perform based on
his/her level of access/privileges. (e.g. maintenance, transaction, simple, parameter and
export report)
MEC_AMO_TEM_034_01
:10 marks
Page 2 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
3)
Write a reflective writing section that summarizes the tasks 2, of your work, learning and
experience.
(10 marks)
Note 1: These task will be extended in the subsequent assignment.
Note 2: The information system selected for assignment 1 shall also be applied assignment 2.
Rules & Regulations:





All resources should be cited using CU Harvard style.
The final assignment must have a Title page, Table of Contents, References/ bibliography using
CU Harvard Style and page numbers.
Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of
the faculty.
Softcopy in word format is to be submitted through Turnitin link on Moodle.
Viva will be conducted after the assignment submission as per the dates informed earlier.
Guidelines:

Assignment must be computer typed.

Font – Times New Roman

Font – Style – Regular

Font – Size – 12

Heading should be with Font Size 14, Bold, Capital and Underline.



Each student has to do the assignment individually
You can refer books in eLibrary or use internet resource. But you should not cut and paste material
from internet nor provide photocopied material from books. The assignment answers should be
in your own words after understanding the matter from the above resources.
The screen design with their proper source codes.

Assignment documentation/report should be typed.

Handwritten assignments will not be accepted
Important Policies to be followed
1. Student Academic Integrity Policy*:
MEC upholds the spirit of academic integrity in all forms of academic work and any form of violation
of academic integrity shall invite severe penalty. Any benefit obtained by indulging in the act of
violation of academic integrity shall be cancelled.
All cases of violation of academic integrity on the part of the student shall fall under any of the below
mentioned categories:
MEC_AMO_TEM_034_01
Page 3 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
1.
Plagiarism
2.
Malpractice
3.
Ghost Writing
4.
Collusion
5.
Other cases
If the student fails a module and has a proven case of academic integrity violation in this module, the
student is required to re-register the module. This is applicable to first and second offenders of
plagiarism.
1. Plagiarism
A. First offence of plagiarism
I.
If a student is caught first time in an act of plagiarism during his/her course of study in
any assignment other than project work, the student will be allowed to re-submit the
assignment once, within a maximum period of one week. However, a penalty of
deduction of 25% of the marks obtained for the resubmitted work will be imposed.
II.
Period of re-submission: The student will have to re-submit the work one week from the
date he or she is advised to re-submit.
III.
If the re-submitted work is also found to be plagiarized, then that assessment will be
awarded a zero mark. Re-submission of the work beyond the maximum period of one
week will not be accepted and the assessment will be awarded a zero mark.
B. Second offence of plagiarism
If any student is caught second time in an act of plagiarism during his/her course of study (in a
subsequent semester), the student will directly be awarded zero for the work in which plagiarism
is detected. In such cases, the student will not be allowed to resubmit the work. A warning of
suspension shall be issued, and student has to sign an undertaking and undergo counselling
session in such cases.
2. Malpractice/Ghostwriting/Collusion
A. First offence of Malpractice/Ghostwriting/Collusion
If a student is caught in an act of Malpractice/Ghostwriting/Collusion for an assessment
component irrespective of coursework or end semester, the student shall fail the module
and shall be required to re-register the module
B. Second Offence of Malpractice/Ghostwriting/Collusion
If a student is caught a second time in an act of Malpractice/Ghostwriting/Collusion for
an assessment component irrespective of coursework or end semester, the student
shall fail the module. A warning of suspension shall be issued, and student has to sign
an undertaking and undergo counselling session in such cases.
MEC_AMO_TEM_034_01
Page 4 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
3. Third Offence of Academic Integrity Violation
If a student is caught a third time in an act of Academic Integrity Violation for an assessment
component irrespective of coursework or end semester (in a subsequent semester), the student
shall fail the module and also shall be suspended for one semester from the College, as
recommended by institutional level academic committee, Chaired by the Associate Dean, Academic
Affairs.
4. Fourth Offence of Academic Integrity Violation:
If a student is caught a fourth time in an act of Academic Integrity Violation for an assessment
component irrespective of coursework or end semester (in a subsequent semester), the student shall
fail the module and also shall be expelled from the College, as recommended by institutional level
academic committee, Chaired by the Associate Dean, Academic Affairs.
5. Other cases
If a student commits an act of academic integrity violation as per the definition of “other cases”
mentioned in the previous section or of a different nature, student’s case shall be forwarded to an
institutional level academic committee, Chaired by the Associate Dean, Academic Affairs. The
committee shall investigate the case by means of a viva and/or a disciplinary hearing and shall take
appropriate decision. The penalty that can be granted to a proven case of academic integrity violation
which falls in this category of “other cases” can be a warning/component zero/ module
fail/suspension/expulsion depending on the nature and gravity of the offence.
6. Types/Variations of Cases:
I.
II.
III.
IV.
If plagiarism is detected in any component of one assessment, the deduction in marks will be
applicable for the whole assessment, even if only the component or part submission alone needs
to be resubmitted.
If plagiarism is detected in a group assessment, all students of the group will be considered as
having committed an act of plagiarism and the policy will then be applied to all students
If plagiarism is detected in any component of a group assessment, the deduction in marks will be
applicable for the whole assessment even if only the component or part submission alone needs
to be resubmitted.
All students of the group would be considered as having committed an act of plagiarism and the
policy will then be applied to all the students of the group.
If the assessment consists of components or part submissions that could be a group assessment
component (e.g. group assignment) and an individual assessment component (e.g. individual
reflection), the following will be applicable:
a.
If plagiarism is detected in the group assessment component, all students of the group
will be considered as having committed an act of plagiarism, The policy will then be
applied to all students of the group. Group assessment component will be resubmitted
as per the policy.
MEC_AMO_TEM_034_01
Page 5 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
b.
c.
If plagiarism is detected in the individual assessment component, the individual
assessment component will be resubmitted and the policy will then be applied to that
student alone.
For both (a) and/or (b), the deduction in marks will be applicable for the whole
assessment.
* for further details Refer to MEC Student Academic Integrity Policy in Student Handbook.
2. Late Submission Regulations:
It is the students’ responsibility to check all relevant timelines related to assessments.
As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days)
for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the
submitted work shall be imposed for each working day following the last date of submission
till the date of actual submission. Assessment documents submitted beyond a period of one
week (5 working days) after the last date of submission will not be accepted and will be awarded
a zero for that assessment. In cases where the submission has been delayed due to extenuating
circumstances, the student may be permitted to submit the work without imposing the late
submission policy stated above. The extended period of submission will be one week from the
original last date of submission. In such cases, the student is expected to submit the supporting
certificates on or before the original last date of submission of the assessment and the decision
of extension rests with faculty responsible for the assessment .The late submission policy shall be
applied if the student fails to submit the work within one week of the original last date of
submission.
Students may contact their teachers for clarification on specific details of the submission time if
required.
3. Research Ethics and Biosafety Policy
To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved
including the welfare of animals and the integrity of environment, all student projects are
expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly the
following shall apply.

Research and other enterprise activities shall be conducted by maintaining the high ethical
standards consistent with national and international standards and conventions.

Any research at MEC that is categorized as high-risk research shall be subject to review and
approval by the Research Ethics and Biosafety Committee.

Research activities involving collection of human or animal tissues and manipulation of microbial,
animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety
Committee.
MEC_AMO_TEM_034_01
Page 6 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP

Participants involved in research must be informed about the purpose of research and intended
uses of research findings. Written consent must be obtained from people involved prior to the
commencement of research.

Data obtained from participants must be treated with high confidence and should be used only
for the intended purpose of research.
MEC_AMO_TEM_034_01
Page 7 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
Front End Applications Development (COMP 20006) Spring 2020
Student ID:
Student Name:
Assignment 1 Evaluation Grid
Task 1
Deliverables
Work
Proposal
Task 2
Deliverables
0
No submission
1-5
6-10
Partial completion Completed work proposal
0-5
5-11
Brief
of Poor
Information
explanation
System
Deliverables 0-10
Login Form
Deliverables
Splash screen
Deliverables
Main Menu
Task 3
Deliverables
Reflection
Partial completion Satisfactory
completion
11-20
Form
design Good design with
only and no partially
codes
incomplete/incorr
ect codes as per
the requirement
0-4
5-9
Form
design Form
design
only and no either company
codes
name/logo
missing
0-4
5-9
Form
design Form
design
only and no without
codes
MenuStrip
0-2
Poor
explanation
12-19
21-29
Mark
20
Complete and
accurate in all
aspects
30
Good design
with Complete and Mark
correct codes but a accurate in all
few requirements are aspects
missing
10-14
Form design either
progress
bar/timer
missing
15
Complete and
accurate in all
aspects
10-14
Form design without
MenuStrip and with
code
15
Mark
Complete and
accurate in all
aspects
3-5
6-9
Partial completion Satisfactory
completion
10
Complete and
accurate in all
aspects
Total Marks
Penalty
Final marks
Signature of Teacher
MEC_AMO_TEM_034_01
Page 8 of 9
Front End Applications Development (COMP 20006) – Spring -2020 – CW1 (Assignment 1) – All – QP
Feedback:
MEC_AMO_TEM_034_01
Page 9 of 9

Purchase answer to see full
attachment